Fortinet Config Generator
9 templates for FortiOS. Fill the form, copy the config. No account required.
Base / Day-0
Config · Networking
Day-zero configuration for FortiGate firewalls: hostname, admin, NTP, DNS, management interface, and FortiGuard settings via FortiOS CLI.
BGP
Config · Networking
BGP routing configuration for FortiGate: eBGP and iBGP peers, route-maps, prefix lists, redistribution, and community settings via FortiOS CLI.
Firewall Policy
Config · Network Security
FortiGate security policy configuration with address objects, service objects, UTM profiles, and IPv4 firewall policies.
High Availability
Config · Networking
FortiGate FGCP (FortiGate Clustering Protocol) HA configuration for Active/Passive or Active/Active mode with session synchronization, heartbeat interfaces, and failover settings.
Hardening
Config · Cybersecurity
CIS Benchmark-aligned hardening for FortiGate firewalls: admin access restrictions, TLS policy, password policy, unused service disablement, and audit logging.
Interfaces
Config · Networking
Physical interfaces, VLAN sub-interfaces, loopbacks, and aggregate (LACP) interface configuration for FortiGate firewalls.
VPN IPSec
Config · Network Security
IKEv2 site-to-site IPSec VPN for FortiGate: phase1/phase2 proposals, tunnel interface, static route, and firewall policy for VPN traffic.
NAT
Config · Network Security
Central SNAT (source NAT pool), VIP (virtual IP / DNAT port-forwarding), and NAT policies for FortiGate firewalls.
SNMP + Syslog
Config · Networking
SNMPv3 with host restriction, per-interface SNMP access control, syslog to multiple collectors with severity filtering, and NTP - configured per VDOM where VDOMs are enabled.